dbArok Snap-In Desk Cable Organizer: 5 Graduated Slots, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact snap-in cable organizer with five graduated channels for 4-6 mm cables. Prints flat, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
An 86 x 30 x 22 mm block with five cable channels at a 17 mm pitch, sized for 4.0, 4.5, 5.0, 5.5 and 6.0 mm cables. Each channel has a snap-in neck, a lead-in funnel and flared ends so cables don't kink. Stick it down with double-sided tape. "dbArok" is debossed on the front.
Make it yours: edit the values at the top of the .scad in free OpenSCAD (cable diameters, clearance, snap tightness, pitch, size, text).
Print settings: flat, no supports, 0.2 mm layers, 3 perimeters, 15-20% infill, PLA or PETG. Reference slice: about 21 g, 51 min.
Honest note: designed and checked in CAD, not test-printed yet, so the pictures are 3D renders. Makes and feedback welcome.
Free under CC BY-NC 4.0.