1 / 6
Spiderweb Coaster Set with Stacking Holder (Halloween Web Drink Coasters) — zdjęcie 1
1 / 6

Spiderweb Coaster Set with Stacking Holder (Halloween Web Drink Coasters)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spiderweb coaster with raised web, rim lip, solid bottom + stacking holder for 4. No supports.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Spiderweb coaster set with a matching stacking holder: a 90 mm round coaster with a raised spiderweb relief (five concentric rings + twelve radial spokes), a 2 mm rim lip that keeps condensation in the dish, and a solid bottom, plus a 100 mm stacking pot that holds four coasters. One last Halloween utility print - and in plain colours it works as a gothic year-round set.

Print 4x coaster + 1x holder for the full set. No supports needed; both parts print flat as modelled. For the two-tone web look, swap filament at the 3 mm layer (the web relief starts there and tops out at 4.6 mm).

HONEST CAVEATS

- The web is a raised decorative relief, not a separate inlay. It is modelled as overlapping solids fused in the slicer (deliberate 0.6 mm embed, no Boolean union) - slicers merge overlapping volumes, so it prints as one solid.

- Coasters catch drips and rings but are not sealed dishes; hand-wash only, PLA/PETG are not dishwasher safe.

- The holder is a flat stacking pot, not a vertical flip rack.

- Web strands are 1.8 mm wide / 1.6 mm tall - fine for a 0.4 mm nozzle, but dial in first-layer squish.

DIMENSIONS

- Coaster: 90 mm dia x 5 mm (3 mm solid floor + 2 mm rim lip), web relief 1.6 mm

- Holder: 100 mm dia x 24 mm, 92 mm inner diameter (1 mm clearance per side), 4 mm wall/floor

DESIGNED IN TRUEGEOMETRY PLAYGROUND

Everything is built with native TrueGeometry Playground commands - no custom scripts, no Boolean operations. Two revolved profiles, five tori, one circular-patterned cylinder. Full build article with printing guide and resizing notes:

https://blog.truegeometry.com/0_0_0_0/blogs/post-6e71ccef.html

FULL COMMAND RECIPE (paste into the Playground Script panel and Run; millimetres, Y up):

# SPIDERWEB COASTER + STACKING HOLDER - TrueGeometry Playground recipe

# Native commands only. No booleans, no custom scripts.

# Paste into the Script panel (Script -> paste -> Run). Units: millimetres. Y is up.

# Print 4x coaster + 1x holder for the full set.

# ============ COASTER: BASE (revolve, solid bottom + rim lip) ============

/view front

/sketch_on XY

/sketch_draw line 0 0 0 10

/tag_last Axis

/sketch_off

/sketch_on XY

/sketch_draw composite [{"type":"line","x":0,"y":0},{"type":"line","x":45,"y":0},{"type":"line","x":45,"y":5},{"type":"line","x":41,"y":5},{"type":"line","x":41,"y":3},{"type":"line","x":0,"y":3},{"type":"line","x":0,"y":0}]

/tag_last CoasterProfile

/sketch_off

/revolve @CoasterProfile @Axis 360

/tag_last CoasterBase

/setprop @CoasterBase color #17141a

# ============ COASTER: WEB RINGS (5 flattened tori on the surface) ============

/parametric torus 8 1

/rotate 90 0 0

/move 0 3.6 0

/tag_last RingA

/setprop @RingA color #e8751a

/parametric torus 16 1

/rotate 90 0 0

/move 0 3.6 0

/tag_last RingB

/setprop @RingB color #e8751a

/parametric torus 24 1

/rotate 90 0 0

/move 0 3.6 0

/tag_last RingC

/setprop @RingC color #e8751a

/parametric torus 32 1

/rotate 90 0 0

/move 0 3.6 0

/tag_last RingD

/setprop @RingD color #e8751a

/parametric torus 40 1

/rotate 90 0 0

/move 0 3.6 0

/tag_last RingE

/setprop @RingE color #e8751a

# ============ COASTER: RADIAL SPOKES (12 arms) ============

/parametric cylinder 0.9 0.9 41 12

/rotate 0 0 90

/move 20.5 3.6 0

/tag_last Spoke

/setprop @Spoke color #e8751a

/pattern circ 12 360 y

# ============ HOLDER: STACKING POT (revolve, holds 4 coasters flat) ============

/sketch_on XY

/sketch_draw composite [{"type":"line","x":0,"y":0},{"type":"line","x":50,"y":0},{"type":"line","x":50,"y":24},{"type":"line","x":46,"y":24},{"type":"line","x":46,"y":4},{"type":"line","x":0,"y":4},{"type":"line","x":0,"y":0}]

/tag_last HolderProfile

/sketch_off

/revolve @HolderProfile @Axis 360

/tag_last HolderBody

/setprop @HolderBody color #2a2430

/move 120 0 0

/view iso

Blog

Playground

Tagi