Spiderweb Coaster Set with Stacking Holder (Halloween Web Drink Coasters)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spiderweb coaster with raised web, rim lip, solid bottom + stacking holder for 4. No supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution
Spiderweb coaster set with a matching stacking holder: a 90 mm round coaster with a raised spiderweb relief (five concentric rings + twelve radial spokes), a 2 mm rim lip that keeps condensation in the dish, and a solid bottom, plus a 100 mm stacking pot that holds four coasters. One last Halloween utility print - and in plain colours it works as a gothic year-round set.
Print 4x coaster + 1x holder for the full set. No supports needed; both parts print flat as modelled. For the two-tone web look, swap filament at the 3 mm layer (the web relief starts there and tops out at 4.6 mm).
HONEST CAVEATS
- The web is a raised decorative relief, not a separate inlay. It is modelled as overlapping solids fused in the slicer (deliberate 0.6 mm embed, no Boolean union) - slicers merge overlapping volumes, so it prints as one solid.
- Coasters catch drips and rings but are not sealed dishes; hand-wash only, PLA/PETG are not dishwasher safe.
- The holder is a flat stacking pot, not a vertical flip rack.
- Web strands are 1.8 mm wide / 1.6 mm tall - fine for a 0.4 mm nozzle, but dial in first-layer squish.
DIMENSIONS
- Coaster: 90 mm dia x 5 mm (3 mm solid floor + 2 mm rim lip), web relief 1.6 mm
- Holder: 100 mm dia x 24 mm, 92 mm inner diameter (1 mm clearance per side), 4 mm wall/floor
DESIGNED IN TRUEGEOMETRY PLAYGROUND
Everything is built with native TrueGeometry Playground commands - no custom scripts, no Boolean operations. Two revolved profiles, five tori, one circular-patterned cylinder. Full build article with printing guide and resizing notes:
https://blog.truegeometry.com/0_0_0_0/blogs/post-6e71ccef.html
FULL COMMAND RECIPE (paste into the Playground Script panel and Run; millimetres, Y up):
# SPIDERWEB COASTER + STACKING HOLDER - TrueGeometry Playground recipe
# Native commands only. No booleans, no custom scripts.
# Paste into the Script panel (Script -> paste -> Run). Units: millimetres. Y is up.
# Print 4x coaster + 1x holder for the full set.
# ============ COASTER: BASE (revolve, solid bottom + rim lip) ============
/view front
/sketch_on XY
/sketch_draw line 0 0 0 10
/tag_last Axis
/sketch_off
/sketch_on XY
/sketch_draw composite [{"type":"line","x":0,"y":0},{"type":"line","x":45,"y":0},{"type":"line","x":45,"y":5},{"type":"line","x":41,"y":5},{"type":"line","x":41,"y":3},{"type":"line","x":0,"y":3},{"type":"line","x":0,"y":0}]
/tag_last CoasterProfile
/sketch_off
/revolve @CoasterProfile @Axis 360
/tag_last CoasterBase
/setprop @CoasterBase color #17141a
# ============ COASTER: WEB RINGS (5 flattened tori on the surface) ============
/parametric torus 8 1
/rotate 90 0 0
/move 0 3.6 0
/tag_last RingA
/setprop @RingA color #e8751a
/parametric torus 16 1
/rotate 90 0 0
/move 0 3.6 0
/tag_last RingB
/setprop @RingB color #e8751a
/parametric torus 24 1
/rotate 90 0 0
/move 0 3.6 0
/tag_last RingC
/setprop @RingC color #e8751a
/parametric torus 32 1
/rotate 90 0 0
/move 0 3.6 0
/tag_last RingD
/setprop @RingD color #e8751a
/parametric torus 40 1
/rotate 90 0 0
/move 0 3.6 0
/tag_last RingE
/setprop @RingE color #e8751a
# ============ COASTER: RADIAL SPOKES (12 arms) ============
/parametric cylinder 0.9 0.9 41 12
/rotate 0 0 90
/move 20.5 3.6 0
/tag_last Spoke
/setprop @Spoke color #e8751a
/pattern circ 12 360 y
# ============ HOLDER: STACKING POT (revolve, holds 4 coasters flat) ============
/sketch_on XY
/sketch_draw composite [{"type":"line","x":0,"y":0},{"type":"line","x":50,"y":0},{"type":"line","x":50,"y":24},{"type":"line","x":46,"y":24},{"type":"line","x":46,"y":4},{"type":"line","x":0,"y":4},{"type":"line","x":0,"y":0}]
/tag_last HolderProfile
/sketch_off
/revolve @HolderProfile @Axis 360
/tag_last HolderBody
/setprop @HolderBody color #2a2430
/move 120 0 0
/view iso