Alientek T90 Soldering Iron Case with storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Alientek T90B that has storage for plenty of solder, a stand, the original sponge holder, and spare tips
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked Chiryu's case for the Alientek T90, but I wanted to keep different things with my iron for field work. I used their included .step file and added storage for 6x metal sewing bobbins of solder, the original sponge holder, 2x spare tips (also fits one VECO-T tip case), and a bearing tip stand from my Pinecil case.
The case also has a spot to hold the top part of the round case but I didn't like that it gets hot when using it as a stand so thats why I used the bearing holder from my old Pinecil case, which is available here. The fit with the top piece and the iron is pretty tight but after using it for a few times it becomes snug without being too tight.
I usually always have multiple type C cables on me and I didn't want to keep one in the case where it might get contaminated by lead, or even worse; have a tiny bead of solder get stuck in the end and cause a short (killed my last iron). I like keeping my solder on metal bobbins because it looks nice and is convenient, but I definitely think that having 6x is overkill. I couldn't find a container for flux that would fit where the 4x bobbins on the right side are but if I find one I'll update this page.