1 / 5
Alientek T90 Soldering Iron Case with storage — image 1
1 / 5

Alientek T90 Soldering Iron Case with storage

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Case for Alientek T90B that has storage for plenty of solder, a stand, the original sponge holder, and spare tips

Rating
0 / 5
Likes
9
Downloads
15
Makes
0
Views
212
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked Chiryu's case for the Alientek T90, but I wanted to keep different things with my iron for field work. I used their included .step file and added storage for 6x metal sewing bobbins of solder, the original sponge holder, 2x spare tips (also fits one VECO-T tip case), and a bearing tip stand from my Pinecil case.

The case also has a spot to hold the top part of the round case but I didn't like that it gets hot when using it as a stand so thats why I used the bearing holder from my old Pinecil case, which is available here. The fit with the top piece and the iron is pretty tight but after using it for a few times it becomes snug without being too tight.

I usually always have multiple type C cables on me and I didn't want to keep one in the case where it might get contaminated by lead, or even worse; have a tiny bead of solder get stuck in the end and cause a short (killed my last iron). I like keeping my solder on metal bobbins because it looks nice and is convenient, but I definitely think that having 6x is overkill. I couldn't find a container for flux that would fit where the 4x bobbins on the right side are but if I find one I'll update this page.

Tags