DIY WLED Ambient Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY WLED Ambient Lamp like Govee Floor Lamp or Philips Hue Play
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Non-printed parts needed:
LED profile in your desired length, the cheap, very basic one like this is fine with a total width of about 17mm
8mm OD / 6mm ID Aluminium tubing in your desired length, should be available at your hardware store
WS2812b LED strip in a matching length for your LED profile
LED controller, I personally like the MuseLab ones for small projects like this and the holder is designed for it
16x M12 hex nuts, to add weight to the base
M3 heat insert + matching M3 bolt to screw down the controller holder
Some glue or tape to glue the profile to the printed parts
Some wires + soldering equipment to connect controller and LED strip
(optional: some rubber feet to stick under the base)
Printing instructions:
stop your print at a height of 14mm to add the nuts to the base
dowels are optional, the parts are centered quite well through the LED profile
you can scale the height of the spacer and middle part
the spacer is completely optional and just for looks