Dupray Neat Steam Cleaner Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A caddy that keeps the Dupray Neat's tools, brushes and hose together in one place.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Dupray Neat ships with a pile of attachments (floor tool, steam lance, triangle tool, window tool, extension tubes, brass and nylon brushes, microfiber pads) that end up loose in a bag. This organizer gives them a home:
Large round well and divided bays for the bigger tools and extension tubes
Four corner cups for the small screw-on brushes
Side pockets for flat tools
A screw-on hose reel on the side to wrap the steam hose
A separate base with four press-in feet so it sits stable and doesn't slide
Designed in Fusion around the standard 17-piece Neat accessory kit.
Parts
Part | Qty | Size (mm) |
|---|---|---|
Organizaer | 1 | 342 x 327 x 165 |
Base | 1 | 268 x 268 x 63 |
Hose-Reel | 1 | 180 x 180 x 80 |
Foot | 4 | 30 x 30 x 20 |
The organizer needs a large-format printer (about 345 x 330 mm bed). Printed on a Prusa XL.
Print Settings
Material: PETG recommended (tools can still be warm after steaming; PLA can soften). Feet in TPU for grip.
Layer height: 0.2 mm (0.6 mm nozzle works well for the big parts)
Walls: 3, infill 15-20%
Supports: organizer - build plate only (short step under the locating ring and the side pockets). Base - none. Hose reel - check the upper flange in your slicer.
STLs are already oriented for printing.