1 / 7
Life Accelerator – Gatling 6-Cigarette Rotary Holder — zdjęcie 1
1 / 7

Life Accelerator – Gatling 6-Cigarette Rotary Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A hand-cranked-Gatling-style holder that lets you smoke six cigarettes at once. Rotating barrel cluster, four parts, no

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

Why smoke one cigarette at a time when you can accelerate your life six barrels at once?

The Life Accelerator is a joke holder styled after a 19th-century hand-cranked Gatling gun. Six cigarettes become the barrels, and the whole cluster spins inside a riveted brass-look breech. It is a gag gift and a party prop, not a recommendation.

FEATURES

• Holds 6 regular / king-size cigarettes (Ø7.8–8.0 mm), filter side in

• Barrel cluster rotates inside a fixed receiver — twist the mouthpiece or the cigarettes

• All six inlets merge inside the rotor, so the rotating joint is outside the airflow (no leaks)

• Detailed breech: feed hopper with window, side crank (decorative), trunnions, front/rear sights, riveted bands, hex-boss muzzle plate

• 4 parts, printed separately and snapped together — no glue, no supports

• About 20 g of filament

PARTS

1. gatling_case.stl — fixed receiver (67 × 56 × 31 mm)

2. gatling_rotor.stl — barrel cluster + mouthpiece, one piece (Ø35 × 58 mm)

3. gatling_clip.stl — C-shaped retaining clip

4. barrel_clamp.stl — barrel clamp ring (optional, sits on the filters)

Assembled size: 67 × 56 × 58 mm (about 132 mm long with cigarettes)

PRINT SETTINGS

• Orientation: exactly as in the files — case and rotor muzzle face down, clip and clamp flat

• Supports: none (overhangs are ≤45°; the hopper ceiling, hopper window and internal air channels are short bridges)

• Layer height: 0.2 mm

• Walls: 2–3, infill 15%

• Material: PLA works; PETG recommended (more heat-tolerant, and the clip flexes better)

• Elephant-foot compensation: on (the filter sockets start on the first layer)

• Print time: about 45–55 min on a fast printer (Bambu / K1 class), about 1 h 45 min on an Ender-3 class machine

ASSEMBLY

1. Push the rotor into the case from the front, mouthpiece first, until it stops.

2. Snap the clip sideways onto the groove where the mouthpiece leaves the case. It now can't come out.

3. Optional: slide the barrel clamp over six cigarettes.

4. Push the cigarettes, filter first, about 10 mm into the sockets. Slide the clamp up to the case.

To take it apart, pull the clip off sideways by its tab.

FIT TUNING

• Clip too tight: lightly file the clip opening (6.0 mm wide; the groove is Ø6.8 mm).

• Sockets too loose or too tight: they taper from Ø8.2 at the mouth to Ø7.8 at the bottom. Scale the rotor 99–101% in X/Y if your printer runs large or small.

• Slim cigarettes (Ø5.4 mm) do not fit.

NOTES

• Novelty item for adults where smoking is legal. Please don't actually try to accelerate your life.

• Keep the burning end away from the holder. Don't smoke down to the filter — PLA softens around 60 °C.

• The crank is decorative; the barrels turn by twisting the mouthpiece or the cigarettes.

• This is a non-functional decorative design inspired by a 19th-century machine gun. It has no firing mechanism.

----------------------------------------------------------------

[IMAGES – suggested upload order]

01_cover.png cover (with cigarettes)

02_model_only.png alternative cover without cigarettes

03_side.png side view

04_assembly.png exploded view + steps

05_print_layout.png print orientation, no supports

06_cutaway.png smoke path cutaway

07_details.png muzzle plate / breech close-ups

Tagi