1 / 1
Pulley modified for F683-ZZ Bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses 2 x F683-ZZ bearings in the pulley instead of the bronze bushing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't have the correct size bronze bushing here but had a bunch of spare F683-ZZ bearings left over from a previous project so I modded the pulley to use them instead.
I've modelled the holes so supports aren't required. Be sure to print at 0.2mm layer height though so the built-in hole supports print properly.
The bearings should be a nice press fit on a properly calibrated printer.