1 / 1
Pulley modified for F683-ZZ Bearings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses 2 x F683-ZZ bearings in the pulley instead of the bronze bushing
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't have the correct size bronze bushing here but had a bunch of spare F683-ZZ bearings left over from a previous project so I modded the pulley to use them instead.
I've modelled the holes so supports aren't required. Be sure to print at 0.2mm layer height though so the built-in hole supports print properly.
The bearings should be a nice press fit on a properly calibrated printer.