Snowmobile Bar End Hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hooks for snowmobile handlebars
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Have you ever wanted to look as cool as the ski doo summit guys with bends on your handlebar but dont have a modern handlebar?
Alot cheaper than to buy full metal ones..
They are not intented to be used for real but you could probably use them if you print them in a stronger filament and use a strong screw.
If you dont plan on taking them out i would recommend putting a bunch of glue on them..
What you need:
The 3d printed parts
77- 100mm long wood screw with around 5.7mm diameter and countersunk head OR other long screw if you design the threads yourself
TPU filament, PLA or PETG and other hard plastic
Other info:
45 degrees tilt but easily changable up to 80 degrees (may not look too good)
13.1 inner diameter (Measuring from the TPU model SqueezePart)
22mm outer diameter
Link to MakerWorld for customization: Bar End Hooks - Free 3D Print Model - MakerWorld