Compact Crochet Thread & Yarn Spinner (100g - 608 Bearing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact Yarn & Crochet Thread Spinner (100g Optimized)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — NoDerivatives
### 🌀 Compact Yarn & Crochet Thread Spinner (100g Optimized)
An elegant, functional, and ultra-smooth rotating spinner designed specifically for 100g crochet threads, lace yarns, and small yarn balls. This tool prevents your thread from tangling, rolling off the table, or pulling too tightly while crafting your beautiful projects!
As a crafter since childhood, I fine-tuned this design through rigorous trial and error on my Bambu Lab P2S to ensure absolute perfection in print settings and mechanical tolerances.
#### ⚙ Hardware Required:
* 1x Standard 608 Bearing (Fits perfectly with both metal 608ZZ and rubber-sealed 608RS variants).
* The bearing fits snugly inside the base for ultimate stability.
#### 🛠 Print Settings & Recommendations:
* **Material:** PLA for best rigidity and smooth rotation (or PETG for toughness).
* Layer Height: 0.20 mm
* Wall Loops: 3 or 4 (Highly recommended to reinforce the bearing housing and the central pin).
* Infill: 10% - 15% (Gyroid or Grid).
* Top/Bottom Surface Pattern: Change to Monotonic Line or Archimedean Chords in Bambu Studio for a premium, glass-like top finish!
* Post-Processing: Let your PEI build plate cool down completely before removing the print to prevent any warping of the thin, flat base.
#### 🔒 License & Commercial Use:
This model is published under the CC BY-ND (Attribution-NoDerivatives) license.
* YES: You are fully allowed to print and sell physical 3D prints of this spinner at local craft fairs, Etsy, or Allegro!
* NO: You are NOT allowed to modify, remix, or re-upload the digital files anywhere.
If you share or sell your prints, please remember to credit me as the designer! Happy knitting and crocheting! 🧶 Kompaktowy stojak (spinner) stworzony specjalnie pod kordonki 100g i cienkie włóczki. Zaprojektowany pod super popularne łożysko 608 (ZZ lub RS). Drukuj z PLA lub PETG na warstwie 0.20 mm. Zgadzam się na sprzedaż gotowych wydruków (użytek komercyjny), ale zakazuję modyfikowania pliku cyfrowego! Udanych robótek! 🧶