Nespresso Capsule Pill Box – Screw Top (OriginalLine Size)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw-top pill box shaped like a real-size coffee capsule. Two parts, no supports, optional food-contact inner colour.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
A tiny pocket pill box that looks exactly like an espresso capsule. The shape follows a real OriginalLine capsule at 1:1 scale (Ø37 mm flange, Ø30 → Ø24.1 mm body, Ø8.8 mm tip), measured with calipers.
The box has two parts. The flange piece is the base: pills sit in its threaded collar, so nothing falls out when you open it. The capsule body is the cap and screws onto the base. When it's closed, the only visible joint is at the edge of the flange, just like on a real capsule.
The inner floor sits 0.6 mm above the top of the flange. Switch filament at 1.6 mm and everything above that height prints in the second material. That way pills only touch the material you choose (for example a food-contact-rated filament), while the flange keeps a metallic or other decorative colour.
Features / Parameters
- Assembled size: Ø37 × 28.9 mm
- Base: Ø37 × 8 mm, pill opening Ø20 mm, rounded inner corner for easy pill pick-up
- Cap: Ø30 × 27.3 mm
- Inner volume: approx. 8 ml (roughly 6–10 common tablets)
- Thread: 2 mm pitch, 45° flanks (FDM-friendly), 0.3 mm radial clearance, about 2.5 turns
- Can be scaled up (e.g. 150 %): scale both parts by the same amount and the thread still fits
Files
- capsule_pill_box_base.stl – flange base with threaded collar
- capsule_pill_box_cap.stl – capsule body with internal thread
Print settings
- Orientation: as exported. Base flange-down, cap open end down (tip up)
- Supports: none
- Walls: 3
- Infill: 10 % gyroid
- Top/bottom layers: 5 / 4
- Layer height: 0.2 mm, 0.4 mm nozzle
- Brim: not needed
- **Seam:** random on both parts. An aligned seam builds a ridge across the thread and makes it bind. If random-seam dots show on glossy or silk filament, try a scarf seam.
Multi-colour (optional)
- Base: change filament at 1.6 mm (the first layer in the new material is layer 9 at 0.2 mm layers). Below that is the flange, above it the collar and the inner floor.
- On a single-nozzle printer without AMS, add a manual pause at that layer.
Tips
- Fit test: Optional - before printing the full model, cut both parts at about 8 mm in the slicer and print only the threaded sections. If the thread feels too tight, scale the cap's X/Y by about 100.5 %.
- Silk filaments look better with a slower outer wall.
- FDM prints are porous between layers. This is fine for dry tablets, but don't treat it as a certified food or medical container.
Not affiliated with Nestlé Nespresso S.A. Nespresso is a registered trademark of its owner.