CR10 SMART Raspberry Pi internal mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CR10 SMART Raspberry Pi internal mount, replace the Creality box with a raspberry pi!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here we have a CR10 SMART Raspberry Pi internal mount, to replace the Creality box with a raspberry pi!
I made this years ago to help a friend as the CR10 Smart at the time had ALOT of bugs in the menus and UI etc and it was pretty un-usable. So i bought a pi to run Octoprint and replaced the creality box that was inside and he could finally use his printer and get some high quality prints
i did use someone's raspberry pi mount as a base for the holes to align as it saved a min vs plotting them myself, but i cannot remember who posted that or where, if someone recognises it on version 1, let me know and ill Credit them.
to make this work, I made a USB A to USB JST cable and plugged it into the motherboard
I made a short little Ethernet cable to connect the pi to the external port
Plugged in the external USB to USB A into the pi
And then ran a power cable from the power supply to a buck converter that i mounted to a random standoff then terminated into a Micro USB to power the pi
I'm not sure if anyone will find this useful but I'm cleaning out my stl / 3d prints files and thought id document / upload it. The pictures are the version 1 but Ive uploaded the version 2 that's basically identical but has rounded edges and is what we used in the end. I'm also unsure what screws it used etc as this was basically 5 years ago i think so everything's a little hazy and i don't know if this could be useful for any other CR10 printers etc