CR10 SMART Raspberry Pi internal mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CR10 SMART Raspberry Pi internal mount, replace the Creality box with a raspberry pi!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here we have a CR10 SMART Raspberry Pi internal mount, to replace the Creality box with a raspberry pi!
I made this years ago to help a friend as the CR10 Smart at the time had ALOT of bugs in the menus and UI etc and it was pretty un-usable. So i bought a pi to run Octoprint and replaced the creality box that was inside and he could finally use his printer and get some high quality prints
i did use someone's raspberry pi mount as a base for the holes to align as it saved a min vs plotting them myself, but i cannot remember who posted that or where, if someone recognises it on version 1, let me know and ill Credit them.
to make this work, I made a USB A to USB JST cable and plugged it into the motherboard
I made a short little Ethernet cable to connect the pi to the external port
Plugged in the external USB to USB A into the pi
And then ran a power cable from the power supply to a buck converter that i mounted to a random standoff then terminated into a Micro USB to power the pi
I'm not sure if anyone will find this useful but I'm cleaning out my stl / 3d prints files and thought id document / upload it. The pictures are the version 1 but Ive uploaded the version 2 that's basically identical but has rounded edges and is what we used in the end. I'm also unsure what screws it used etc as this was basically 5 years ago i think so everything's a little hazy and i don't know if this could be useful for any other CR10 printers etc