1 / 2
Nozzle Organizer for M6 Nozzles - Labelled Sizes, Screw-In Holes, Wrench Slot (OpenSCAD) — zdjęcie 1
1 / 2

Nozzle Organizer for M6 Nozzles - Labelled Sizes, Screw-In Holes, Wrench Slot (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Screw your spare M6 nozzles in by size: 8 labelled rows of 4, a wrench pocket and a needle tray. No supports.

Ocena
0 / 5
Polubienia
3
Pobrania
2
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Stop losing nozzles in a bag. This block holds 32 M6 nozzles (E3D V6 style, Prusa MK3/MINI, Creality and most clones), sorted into labelled rows.

FEATURES

• 8 rows, engraved 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0, 4 nozzles each.

• 5.7 mm holes with a lead-in: each nozzle threads in about a turn and stays put, tip down, so the tip is protected.

• A round pocket that stands a 7 mm nozzle socket or a small spanner upright.

• A trough for cleaning needles, picks and a brass brush.

• Prints flat with no supports. Bambu Studio: 1 h 15, 33 g, no warnings.

CUSTOMIZE (OpenSCAD)

Your own list of sizes (or labels like CHT, HF or HARDENED), nozzles per row, the hole size if your printer grips tighter or looser, and the wrench pocket and needle tray on or off.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi