Broom and Mop Holder - Snap-In Grip Clips plus Dustpan Hook, Wall Mount (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two springy snap-in clips for broom and mop handles plus a dustpan hook. Screws to the wall, no supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Get the broom and mop off the floor. Push a handle into a clip: the springy arms open and snap closed round it, and a gentle pull releases it. A hook between the clips takes a dustpan, a cloth or a brush.
DETAILS
• Clips for 25 mm handles (they grip from about 22 to 28 mm). Change the size in OpenSCAD for anything from 16 to 40 mm.
• Rounded lead-in tips so handles slide in easily.
• Two counterbored holes for 4-5 mm screws, placed above the clips so a screwdriver reaches them.
• Prints standing on its back edge, so the clips are built along their length (the strong way) and nothing needs support. Bambu Studio: 1 h 07, 30 g, no warnings.
CUSTOMIZE (OpenSCAD)
Handle diameter, 1 to 4 clips, the hook on or off, clip height and screw size.
PETG flexes better than PLA for clips used every day. 4 walls for strength.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.