1 / 1
Round 15mm x 2mm Magnet - Prusa Core One Top Filament Guide with Bowden Coupler — zdjęcie 1

Round 15mm x 2mm Magnet - Prusa Core One Top Filament Guide with Bowden Coupler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A top filament guide with Bowden connector and 15mm x 2mm maagnet cutouts.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Round 15mm x 2mm Magnet - Prusa Core One Top Filament Guide with Bowden Coupler

I modified the original model by bullitt168 to fit the magnets I had on hand which measure to 14.95mm x 1.75mm

Print Settings

  • 0.2mm layer height

  • 3 perimeters

  • Organic supports, build plate only, block supports on the inside with 2 magnet cutouts.

  • Filament setting: Slow down if layer print time is below, set to 0

These settings are included in the uploaded gcode file. I changed the above filament setting to prevent the higher z axis parts of the print from becoming shiner while the bottom is more matte.

Tagi