1 / 1
Round 15mm x 2mm Magnet - Prusa Core One Top Filament Guide with Bowden Coupler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A top filament guide with Bowden connector and 15mm x 2mm maagnet cutouts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Round 15mm x 2mm Magnet - Prusa Core One Top Filament Guide with Bowden Coupler
I modified the original model by bullitt168 to fit the magnets I had on hand which measure to 14.95mm x 1.75mm
Print Settings
0.2mm layer height
3 perimeters
Organic supports, build plate only, block supports on the inside with 2 magnet cutouts.
Filament setting: Slow down if layer print time is below, set to 0
These settings are included in the uploaded gcode file. I changed the above filament setting to prevent the higher z axis parts of the print from becoming shiner while the bottom is more matte.