1 / 6
Logitech C310 (And other M8 lens mounts) Telescope Adapter (M8x0.5 to 1.25") — zdjęcie 1
1 / 6

Logitech C310 (And other M8 lens mounts) Telescope Adapter (M8x0.5 to 1.25")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

First used this adapter I found: https://www.thingiverse.com/thing:3028588 but I didn't like the results it gave,…

Ocena
0 / 5
Polubienia
3
Pobrania
54
Wydruki
0
Wyświetlenia
466
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

First used this adapter I found: https://www.thingiverse.com/thing:3028588 but I didn't like the results it gave, there's too much bounced light coming into the sensor giving a very purple hue to the image. I made this one to screw into the existing lens thread, take care to print at a sufficiently small resolution for the threads, I used Cura's built in 0.12mm settings.

This adapter requires only the lens of a Logitech C310 to be removed, it fits with the front cover in place!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.12mm

Infill:

100%

Filament: Creality PLA Black


Notes:

Might want to add a brim if the build plate adhesion isn't good enough.

Category: Other

Tagi