Logitech C310 (And other M8 lens mounts) Telescope Adapter (M8x0.5 to 1.25")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
First used this adapter I found: https://www.thingiverse.com/thing:3028588 but I didn't like the results it gave,…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 54
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
First used this adapter I found: https://www.thingiverse.com/thing:3028588 but I didn't like the results it gave, there's too much bounced light coming into the sensor giving a very purple hue to the image. I made this one to screw into the existing lens thread, take care to print at a sufficiently small resolution for the threads, I used Cura's built in 0.12mm settings.
This adapter requires only the lens of a Logitech C310 to be removed, it fits with the front cover in place!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12mm
Infill:
100%
Filament: Creality PLA Black
Notes:
Might want to add a brim if the build plate adhesion isn't good enough.
Category: Other