SnapCable — Chainable Cable Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chainable modular cable organizer with dovetail side-links and tapered snap slots.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Cable organizer that actually holds cables. Free.
Straight-slot holders let cables fall out and lightweight blocks walk across the desk — the two most common complaints. I fixed both with geometry: a steep 7.5→4.5mm taper that bites thin USB-C cables, a ballast chamber you fill with washers or nuts so it never slides, and dovetail side-links so you can chain units into 6/9/12-slot rails. Print several, link them end to end.
What's included
- zilla-snap-cable-v2.stl — dock + press-fit plug (two solids, one plate)
Print settings
- 0.2mm layers, 3 walls, 20% infill, NO supports
- PLA, print flat
- 70 x 24 x 18mm dock (112mm full plate with plug), ~12g, ~1h17m
- Three tapered slots (7.5mm top → 4.5mm floor)
- Ballast chamber: drop in washers/nuts, press plug in by hand
Printed it? Post a Make — show me your cable rail.
---
More of my designs on Cults3D (Zilla's domain — premium versions live there): https://cults3d.com/en/3d-model/gadget/snapcable-v2-modular-dovetail-cable-dock