MeshCore Companion XIAO nRF52840 18650 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact case for XIAO nRF52840 + Wio SX1262 with 18650 battery, power switch and USB-C charging.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact case designed for the Seeed Studio XIAO nRF52840 + Wio-SX1262 LoRa kit, suitable for MeshCore or Meshtastic projects.
The case houses a single 18650 Li-ion battery, an ON/OFF rocker switch, and a USB-C charging module with battery protection.
Required Components
Main Board
Seeed Studio XIAO nRF52840
Seeed Studio Wio-SX1262 LoRa module
Battery & Holder
1× 18650 Li-ion battery
1× Single-cell 18650 battery holder with wires
Holder dimensions: 76 × 21 × 20 mm
Power Switch
Mini SPST rocker switch
Panel cutout: 13.8 × 9.2 mm
Overall dimensions: 15 × 10.5 × 19 mm
Charging Module
TP4056 USB-C 1S Li-ion charging module
PCB dimensions: 28 × 17 mm
Separate battery and protected output terminals
All components are generic and can be sourced anywhere.
For reference, these are the exact components I used in my build:
https://dratek.cz/arduino-platforma/7500-bateriovy-box-1x18650-s-vodici.html
https://dratek.cz/arduino-platforma/7699-kolebkovy-vypinac-ac-3a-250v.html
https://dratek.cz/arduino-platforma/34679-nabijeci-deska-li-ion-baterii-usb-c.html
Disclaimer: AI was used only to generate the thumbnail image because my desk is a mess. 😅 The 3D modeling, design, and everything else were done entirely by hand, with no AI involvement.