MeshCore Companion XIAO nRF52840 18650 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact case for XIAO nRF52840 + Wio SX1262 with 18650 battery, power switch and USB-C charging.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 1
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact case designed for the Seeed Studio XIAO nRF52840 + Wio-SX1262 LoRa kit, suitable for MeshCore or Meshtastic projects.
The case houses a single 18650 Li-ion battery, an ON/OFF rocker switch, and a USB-C charging module with battery protection.
Required Components
Main Board
Seeed Studio XIAO nRF52840
Seeed Studio Wio-SX1262 LoRa module
Battery & Holder
1× 18650 Li-ion battery
1× Single-cell 18650 battery holder with wires
Holder dimensions: 76 × 21 × 20 mm
Power Switch
Mini SPST rocker switch
Panel cutout: 13.8 × 9.2 mm
Overall dimensions: 15 × 10.5 × 19 mm
Charging Module
TP4056 USB-C 1S Li-ion charging module
PCB dimensions: 28 × 17 mm
Separate battery and protected output terminals
All components are generic and can be sourced anywhere.
For reference, these are the exact components I used in my build:
https://dratek.cz/arduino-platforma/7500-bateriovy-box-1x18650-s-vodici.html
https://dratek.cz/arduino-platforma/7699-kolebkovy-vypinac-ac-3a-250v.html
https://dratek.cz/arduino-platforma/34679-nabijeci-deska-li-ion-baterii-usb-c.html
Disclaimer: AI was used only to generate the thumbnail image because my desk is a mess. 😅 The 3D modeling, design, and everything else were done entirely by hand, with no AI involvement.