Raspberry Pi 5 Case for AI HAT+ (Hailo-8, 26 TOPS) & Active Cooler – with Snap-in Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 5 enclosure that fits the official Active Cooler and the Hailo-8 AI HAT+ (26 TOPS), plus a cradle stand.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A two-part case for the Raspberry Pi 5 with the official Active Cooler and the Raspberry Pi AI HAT+ (Hailo-8, 26 TOPS) mounted on top. It works on its own as a desk enclosure, or you can click it into the included stand / cradle to keep it upright.
Parts
Base – bottom plate the Pi mounts to (90.9 × 61.9 × 6.3 mm)
Shell – top cover with ventilation slots, clears the Active Cooler and the AI HAT+ (92.7 × 61.9 × 25.9 mm) Hole for the 20x20 radiator.
Stand – cradle the assembled case snaps into (95.7 × 20 × 48 mm)
The 3MF contains all three parts laid out on one plate. Printed and used it myself, but I don't have any photos.
Printing
Material: ASA
Supports: needed only for the shell (top cover); the base and the stand print without supports.
Assembly
The base and the shell are held together with 8× M2.5 screws through the corner holes.
EDIT: Shell design fix – the screw mounting posts were not adequately reinforced where they joined the shell, causing them to break off easily. I've strengthened the connection and added extra material to improve durability. The new design is probably a bit overengineered, but I was short on time.
License
CC BY 4.0 – feel free to remix, modify and use it however you like, including commercially. Just credit me as the original author.