Tilt & Tens Balance Seesaw with Counters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-pan balance with 8 counters and 4 dot tiles. Tips to the heavier side, settles level when equal.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Standard Digital File License
A two-pan balance with eight identical counters and four dot tiles. The pivot sits well above the beam, so it tips clearly to the heavier side and settles level when both sides match.
A small balance for counting and comparing. The beam hangs from an axle that drops into two open slots in the stand. Because the pivot is 33 mm above the beam, the balance is stable: it returns to level when both pans hold the same, and tips clearly to the heavier side when they do not. The eight counters are the same file printed eight times on the same plate, so they weigh the same. The four tiles carry one to four raised dots.
How to play
Put counters on each side and guess which way it will tip.
Draw a dot tile and load that many counters on one side; make the other side level.
Load one side and ask how many it takes on the other to bring it level.
What you need
Nothing else: no screws, no glue.
Print settings
Material: PLA, one colour
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 2–3
Infill: 15% or more — print all 8 counters on the same plate with the same settings so they weigh the same
Supports: check the beam in your slicer: the axle stands out past its three ears. If the slicer flags an overhang there, tree supports from the build plate are enough.
Orientation: As in the files: beam flat with the axle on top, stand on its foot, tiles and counters flat.
Bed: One plate on 256 mm beds (P1S, P2S, X1, A1). On 180 mm beds (A1 mini) use the two-plate 3MF: the beam fits only on the diagonal.
Files
beam.stl— beam with two pans and the axle (1×)stand.stl— stand with two open slots (1×)counter_print-8.stl— counter, print 8dot-tile_1.stl … dot-tile_4.stl— tiles with 1–4 dotstilt-and-tens_one-plate_256mm-bed.3mf— everything arranged on one 256 × 256 platetilt-and-tens_plate1-of-2_180mm-bed.3mf / plate2-of-2— the same set split for 180 mm beds
Assembly
Drop the axle into the two slots of the stand. That is all.
Limits
It compares counts, not grams: it is not a weighing scale.
How it was checked
Printed and played with: we have printed this set several times and use it at home.
Safety
This is not a certified toy.
The counters are 26 × 20 × 13 mm, small enough to swallow: small parts, choking hazard. Keep them away from anyone who still puts things in their mouth.
Designed by Misla, a small studio of engineered 3D-printable parts: https://mislastudio.com/?utm_source=printables&utm_medium=free_model&utm_campaign=tilt-tens