Bracket for IRF520 Mosfet Driver Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a IRF520 Mosfet Driver Module bracket that was designed for high vibration applications and still has the…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 117
- Wydruki
- 1
- Wyświetlenia
- 413
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a IRF520 Mosfet Driver Module bracket that was designed for high vibration applications and still has the ability to be removed & replaced quickly without screws holding the module in the bracket.
Three versions are attached:
*mosfet_bracket9.STL* --- lower profile thumb-tab
*mosfet_bracket9_higher_thumbtab.STL* --- higher thumb tab (easier to to remove module)
*mosfet_bracket99_ziptie.STL* (7/11/2017) --- higher thumb tab + ZIP Tie holes for adding zip tie for securing module in high vibration applications. This was just for peace of mind, I haven't had any issues where the module falls out without a zip tie.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
30%
Notes:
There maybe some minor cleanup near the thumb-tab notch, but its manageable.
Category: Electronics