1 / 1
i9 hydra front hub 15mm end cap (center lock) — zdjęcie 1

i9 hydra front hub 15mm end cap (center lock)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had torque caps but went to a fox fork and needed to make these.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Room for an oring like the stock end caps.  I ended up machining these out of aluminum but the right plastic might work. the ID in the model is 18.1mm, but I measured the OD of the axle on the hub to be 18mm, so you may want to adjust this to match your printer's clearances. 

Tagi