1 / 1
i9 hydra front hub 15mm end cap (center lock)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had torque caps but went to a fox fork and needed to make these.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Room for an oring like the stock end caps. I ended up machining these out of aluminum but the right plastic might work. the ID in the model is 18.1mm, but I measured the OD of the axle on the hub to be 18mm, so you may want to adjust this to match your printer's clearances.