Counting matching models…
I replicated these hubcaps for 16 "borbet wheels mounted on a FIAT Grande Punto. I have not inserted any logo but you can safely add it chased or stick stickers, you can also use PETG or ABS but the object does not make efforts so it does…
copy of hubcap for suzuki vitara
realmente fiz para meu carro e deu certo Category: 3D Printing
I loved the transformers in grade school. This is my design of the micro series that were similar to penny racers. They were released in the late 80's. I've included the head as a single part for single extrusion as well as a dual part…
Each aero cover requires one body and 4 tabs. Each cover also requires the following hardware: 4x M3x16mm stainless pan head screws 4x M3 nuts If you want to secure it with metal hardware instead of just glue, you'll additionally need: 1…
Replacement hubcap for Qeridoo bicycle trailers. Print the part with a flexible filament with support material. Supports are only required on the outside edge of the part. The inside dome will print fine without support material. The…
Not the most gentle enviroment for a 3d print, so I needed to think about sun exposure, rain, roadsalt, g-forces, stone chips, etc in the design and filament, but the outside needed to look perfectly like the others, as you'd see two of…
A friend lost some of these hubcaps on a bumpy ride. Luckily he had one left that I could take measurements and model it in Blender. The logo is a separate part so you can print it in a different color. I'd also suggest a bit of superglue…
poklička pro alu kola na Opel astra F tisknuto v ASA pod úhlem 45°, majitel je následně bude lakovat. seděly na první dobrou :)
scale it as required, these are for a diameter of 70mm so I scaled them to 69mm just to make sure it fits at first attepmt.
A replacement hubcap for ATS rims. The logo can be printed in a second color. I tried TPU, PLA, PETG and Extrudr GreenTec Pro to print the hub cap as a sparepart. All of them were printed with 100% infill and .2mm layer hight. PETG stayed…
Replacement hubcap for Opel Frontera. Printed in PETG with a 0.6mm nozzle and 0.44 layer height to cut down print time.
If your wheel has a different hole, you can download the inventor part and modify the draw in order to fix it in the wheel! To make the lettering a different color than the background enter a pause and a filament change from the slicer.
Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.
Empty hubcap for stickers/painting/etc. Outer diameter 77mm Hub diameter 58mm Fits Porsche original rim.
The original equipment does not have a front wheel hub cap. Printing from plastic with high adhesion between layers. Before installing, use a grease to protect the hub nut from rust. Category: Automotive
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends polaris rzr unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy!
Hubcaps for Toyota Auris 2010 and other Toyota models. Print without supports and at preferred layer height with PETG
Fiat Freemont / Dodge Journey wheel hubcap (center cover).
Designed for the Viking/Stihl iMow 632 robotic lawn mower. Fits both new and old version of the wheels, should also fit the terrain wheels. Prints in two parts for easy printing on FDM printer, the registration holes are 2.6mm, cue tips…
A Tux hubcap for Suzuki Swift. print back separately (PETG is preferred) print the tux front, change filament accordingly to have the 3 colors effect glue parts together
This part replaces the original Pajero 3 alloy wheel hub cap, part number MR992254. The part differs from the original by the addition of a fifth clip for increased durability. Diameter - 81mm.
Print vertically with supports for smoothest look Do not print supports in clip holes Print with ASA/ABS for best UV resistance Glue chrome rings on for best results
Simple hubcap that uses the hub retaining clip to hold the hubcap in place
These are Hubcap Wheel for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). his is an add-on for "Rear axle housing for open differential toyota third member" ( http://www.thingiverse.com/thing:1344938 ). It maintains…
Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.
when printing use 70-100% infill, should be fine with no supports. the fan speed should be set at 50-80% Feel free to modify and put your design on them.
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends Polaris razor unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy! This model features…
Holder for the rectangular style hygrometer-thermometer and fits: -Ø55mm hub of cardboard spools (e.g. Overture) -Ø53mm hub of cardboard spools (e.g. California filaments) The hygrometer's snaps can be pressed in from the flat face and…
Print with something that can survive the heat of the brakes. I made mine with PETG. Needs supports.
Wheel hubcap with outer diameter of 56mm It is all one solid piece, goes in tight tap slightly with screwdriver handle, put small bead of RTV for no reason.
Print from any UV-resistant plastic.
"Tick, tick, tick, tick, tick." That's the sound of my Chrysler 300 while I'm rolling down the street. The sound is the result of the hubcaps bouncing around on the wheel rims. They do not fit snugly to the rim so move around in the wheel…
The Prius Gen 2 usually comes with plastic aero wheel covers for the alloy wheels, but one of mine has fallen off. I made this hub cap to improve the look slightly. This should probably be printed in ASA, so that it isn't affected by UV…
These are basic Traxxas 6873r wheel hubcaps made to bolt on over your traxxas wheels in order to change colors and styles. If you'd like me to release more designs just leave a comment. Feel free to mod as necessary. I made these for my…
Replacement for the Mickey Thompson MM-245 wheel hubcaps. Unfortunately, I lost the original description of this that had a parts list when YouMagine did their recent redesign. Basically, for each hubcap, you will need: Two very good…
Centerlock style hubcap that i designed for my specific rims , That is 15x7jj TC105X ET 35. Not sure if this would fit into any other rims but if your center hole is 61mm , The hub part should fit snugly without any modification /…
This is a tool designed to tighten/loosen your 1999-2007 Chevy/GMC hubcaps, preventing the threads from stripping out.
needed a little more thread than the original model a little glitchy but good tinkercad
This is a universal 3D-printed adapter ring (hubcap) designed to adapt a Spectrum Filaments 250g cardboard spool (approx. 140mm outer diameter) for use in automated material stations. It upscales the spool to a standard 200mm diameter ,…
Best printed with ABS/ASD for strength.
I bought 15" hubcaps without any car brand markings and decided to add Toyota logo emblems (photo 1). I drew and printed the base of the logo from black PLA and silver PLA (logo) with 30% infill and ironing of the last layer - diameter…
Hello, this is the hubcap of my 3D Robomow Wheel. That is a decorative design and a theft protection. In the video you can see the tire without cap. if you want to keep me awake, feel free to buy me a coffee ;-)…
Replacement hub-caps for these wheels cost $100-$150 because apparently they're made of rare plastic found only in remote corners of the world un-reachable by mortal man. On top of that they're poorly designed so tightening them to the…
Printable tool to be able to remove the hubcaps on your BMW E38 E39 with factory wheels in case you lost the special tool. Two models available, one to accommodate the factory wheel brace 17mm hex and one to accommodate the 16m Heyco tube…
Here is an RV hubcap that I designed in Onshape for a friend.
The original orange wheel covers that came with the mower were a bit too much for the eyes. So I created a more basic and clean design. Mounting: They are just clipped onto the wheels. Put the mower on its back an unlock the 3 clips. Then…
This is a hubcap for the steel rims for small Subaru vans. Mine started to crack so had to print new. I have had the PETG caps on for a couple of months and not a single one has fallen off. So a succesful design. Print Settings Printer…
Alerta Alerta Antifascista. I made this file with OpenSCAD and inkscape. The .gcode is for Prusa MK4S with input shaper and a 0.4 nozzle The .gcode is made for MK4S with input shaper and a 0.4mm nozzle You will need 3 kinds of PLA…
3D Scan einer Puch Radkappe, den ich für einen Freund angefertigt habe. Für original Mercedes G/Puch G 16 Zoll Aluminiumfelgen Baureihe 460. Das Modell ist nicht perfekt, aber ein guter Ausgangspunkt für weitere Projekte und…
CZ Nemůžete sehnat pokličku pro vaše kola a už jste z toho zoufalí? Máme pro vás řešení. Nemusíte se už nikdy dívat na eBay a následně do své prázdné peněženky, či čelit podvodníkům z bazoše. Řešení máte jako na dlani. Stačí jen zmáčknout…
Scanned hubcap model for hecht lawnmower
bearing cap hub i made for the gear spinner ( https://www.thingiverse.com/thing:2135400 ) Category: Toy & Game Accessories
you never knew you needed it, but hulk hubs are here! prints with no support Check out my youtube channel for 3D printing and 3D design videos! https://www.youtube.com/channel/UCuHuFfEPBPNv9AmoDYmXFiQ Check out my collection of warhammer…
version 1.0 Needed something to fill the hole after the original hubcaps were removed from a stock GT-Line 21" wheel off a 2026 KIA EV9. Designed using Tinkercad, 51mm inner dia. The KIA Logo insert fits from behind the hubcap, use strong…
Print seetings: PETG support needed at least 3 perimeter recommended
These are the retention clips for the Scion emblem for use on after market hubcaps. I had to Dremel out some holes in the after market hubcaps but these worked like a charm. They are two different sizes. The emblem requires one of each…
this is a replacement hubcap for a Brenderup 200 trailer, it was modeled after the original cap. printed and fitted on my own trailer with a 52mm hole.
100% infill of all wall of course
The hubcaps fit RC4WD 6 Lug and almost all clones from China Versions with diamters of 23.00, 41.50 and 46.00 mm are available Printed in PLA with 15% infill
Add your text on your own. Printed with supports. Used some heat with the heatgun when I snapped them on, probably not necessary
We got a Silverback basketball goal for Xmas and it wasn't shipped with a hubcap on the wheels. This would allow the washer and rod to pass through the goal and the wheel would fall off. Printed this one and it works perfect. Printed with…
Hubcap for Broil King BBQ When setting up my new BBQ ( Broil King Regal Pellet Smoker) the hubcaps for the wheels were not up to par. They could not be attached, even using a persuader. One broke just trying that. The manufacturing…
I Made this simple HubCap/Emblem holder for my BMW X1. It fits 4 caps, the holes got a diameter of 67mm. It stands at an angle of 70 degrees. I will make one with a different diameter size in the near future. Leave a tip if you like it.…
Ok, I swiped my sidecar against an obstacle, and knocked off the hub cap. Lost it forever but luckily no bent metal. This file is for the 2014+ disk brake sidecar hub.
Radio Flyer made a cool little Tesla replica ride-on toy that has lasted for years. One of the plastic hubcaps was damaged or lost and no one online sells replacements. I tried modeling and was unsuccessful due to lack of talent. Finally…
We got a Silverback basketball goal for Xmas and it wasn't shipped with a hubcap on the wheels. This would allow the washer and rod to pass through the goal and the wheel would fall off. Printed this one and it works perfect. Printed with…
Hubcap for Broil King BBQ When setting up my new BBQ ( Broil King Regal Pellet Smoker) the hubcaps for the wheels were not up to par. They could not be attached, even using a persuader. One broke just trying that. The manufacturing…
3D Scan einer Puch Radkappe, den ich für einen Freund angefertigt habe. Für original Mercedes G/Puch G 16 Zoll Aluminiumfelgen Baureihe 460. Das Modell ist nicht perfekt, aber ein guter Ausgangspunkt für weitere Projekte und…
I loved the transformers in grade school. This is my design of the micro series that were similar to penny racers. They were released in the late 80's. I've included the head as a single part for single extrusion as well as a dual part…
I bought four rims for a Chevrolet Trailblazer, but they only came with one hubcap, so I copied it and spray-painted it to match the wheels, because in Europe, specifically in the Czech Republic, these hubcaps are hard to find and…
A recreation of GRID GD style wheel hub center cap with a region for your own plain text in the center as well as the FORD version I used for my vehicle with text stylized to match a 90's Explorer. After printing I used filling and…
