1 / 4
Opel Meriva hubcap with logo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hubcaps often go missing from a bumpy ride. I made this for a friend, it latches perfectly on his 2005 Opel Meriva.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 158
- Makes
- 0
- Views
- 715
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A friend lost some of these hubcaps on a bumpy ride. Luckily he had one left that I could take measurements and model it in Blender.
The logo is a separate part so you can print it in a different color. I'd also suggest a bit of superglue around the base of the logo.
Print suggestions:
- Suggested Material: ABS, ASA or PETG, since it's gonna be directly exposed to the elements.
- Nozzle: 0.4mm
- Parameters/infill: at least 3 params, with at least 15%. You could go higher or print 100% infill for a more sturdy print
- Layer height: anywhere between 0.16mm - 0.24mm work fine
- Supports: The auto-generated ones from PrusaSlicer or Cura work just fine. Only needed for the 5 latches of the cap part