1 / 4
AMS Hubcap Adapter for Spectrum Filaments 250g cardboard spool — image 1
1 / 4

AMS Hubcap Adapter for Spectrum Filaments 250g cardboard spool

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Universal left/right 140mm to 200mm adapter ring for 250g Spectrum Filaments cardboard spools. Works with AMS/CFS/ACE.

Rating
0 / 5
Likes
4
Downloads
26
Makes
0
Views
113
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

This is a universal 3D-printed adapter ring (hubcap) designed to adapt a Spectrum Filaments 250g cardboard spool (approx. 140mm outer diameter) for use in automated material stations. It upscales the spool to a standard 200mm diameter, allowing mini spools to run smoothly on motorized roller systems.

Note: Print two pieces of this model, one for each side.


Simple install by slightly bending the spokes outwards at each latch position to disengage the clasp whilst pressing down the filament spool accordingly.
Easy to reuse between spool swaps, only required to print two for single filament print use.
Improved clasp lock mechanism that doesn't delaminate the cardboard rims between swaps.

STEP file provided for easy remix  modifications for other rim dimensions.

Hardware Compatibility

This adapter is universally designed to work across major multi-material systems that utilize edge-roller mechanisms, including:

  • Bambu Lab AMS

  • Anycubic ACE Pro (Color Engine)

  • Creality CFS (Color Filament System)


Features

  • Universal AMS Support: Bridges the gap for mini spools across different multi-material hardware brands.

  • Protects Your Gear: Prevents cardboard dust from shedding inside your expensive material stations.

  • High Traction: Ensures consistent friction on motorized rollers to prevent feeding and retraction errors.

  • Material Optimized: Features cutouts to drastically reduce print time and filament consumption, still being sturdy and reinforced around the clasp design.

  • Snap-Fit Tabs: Interior notches clamp firmly onto the cardboard rim without needing glue.


Print Settings

  • Quantity Needed: 2x per spool.

  • Material: PETG recommended for better flex and durability during installation.

  • Wall Loops: 3–4 walls for robust outer rims, and solid snap lock flanges.

  • Infill: 15%–20%.

  • Supports: None. Print flat on the build plate.

Consumes only 45g filament per part, 1:20h with 4 wall loops and 15% 3d honecomb on Anycubic printer.

Spool Dimensions

  • Outer 250g spool rim: 140mm (Design headroom 0.25mm).

  • Rim width (for clasp): 3mm. (Design accept up to 3.5mm)

Tags