Makita DMP180 Inflator Mount for Honeycomb Storage Wall (HSW)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the Makita DMP180 cordless inflator on a Honeycomb Storage Wall.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder for the Makita DMP180 cordless tyre inflator, combined with a Honeycomb Storage Wall (HSW) insert so it hangs on the wall (HSW system originally by RostaP).
It combines existing designs from Printables – thanks to the original authors: - Elegant Screwiverse Inserts for Honeycomb Storage Wall (HSW) by yass (CC BY-NC-SA) – the insert and honeycomb geometry - Wall Mount Makita DMP180 by Sticky Steve (CC Public Domain) – the inflator holder
Size: 76 × 95 × 49.5 mm.
Printing
Material: typically ASA, PLA or PETG.
Fusion 360 source (
.f3d) is included, so you can adapt it to your own needs.
Notes
I designed, printed and use this myself, but I don't have photos of the printed part yet – I may add them later.
Provided as is, without any warranty. Check the fit for your own tool/setup before relying on it.
License
Because it builds on non-commercial design(s), it keeps their terms: CC BY-NC-SA 4.0 – credit the original authors and me, no commercial use, share remixes under the same license.