Makita DMP180 Inflator Mount for Honeycomb Storage Wall (HSW)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the Makita DMP180 cordless inflator on a Honeycomb Storage Wall.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder for the Makita DMP180 cordless tyre inflator, combined with a Honeycomb Storage Wall (HSW) insert so it hangs on the wall (HSW system originally by RostaP).
It combines existing designs from Printables – thanks to the original authors: - Elegant Screwiverse Inserts for Honeycomb Storage Wall (HSW) by yass (CC BY-NC-SA) – the insert and honeycomb geometry - Wall Mount Makita DMP180 by Sticky Steve (CC Public Domain) – the inflator holder
Size: 76 × 95 × 49.5 mm.
Printing
Material: typically ASA, PLA or PETG.
Fusion 360 source (
.f3d) is included, so you can adapt it to your own needs.
Notes
I designed, printed and use this myself, but I don't have photos of the printed part yet – I may add them later.
Provided as is, without any warranty. Check the fit for your own tool/setup before relying on it.
License
Because it builds on non-commercial design(s), it keeps their terms: CC BY-NC-SA 4.0 – credit the original authors and me, no commercial use, share remixes under the same license.