Lemon and Lime Juicer - Ridged Reamer with Juice Dish, Pip Ring and Pour Notch (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ridged citrus reamer in a dish that catches the juice, with a pip ring, pour notch and thumb tab. No supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Twist half a lemon, lime or orange on the ridged cone and the juice runs into the dish; a slotted ring round the cone holds back most of the pips. Pour from the notch.
DETAILS
• 55 mm reamer (lemons and limes; set 75 for oranges) in a 115 mm dish, with a thumb tab to hold it steady.
• Prints upright with no supports: the dish flares at 45 degrees and the cone narrows as it rises. Bambu Studio: 1 h 49, 47 g, no warnings.
• Use a food-safe filament such as PETG, and wash it straight after use (printed layers can trap food).
CUSTOMIZE (OpenSCAD)
Reamer diameter.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.