Lemon and Lime Juicer - Ridged Reamer with Juice Dish, Pip Ring and Pour Notch (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ridged citrus reamer in a dish that catches the juice, with a pip ring, pour notch and thumb tab. No supports.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Twist half a lemon, lime or orange on the ridged cone and the juice runs into the dish; a slotted ring round the cone holds back most of the pips. Pour from the notch.
DETAILS
• 55 mm reamer (lemons and limes; set 75 for oranges) in a 115 mm dish, with a thumb tab to hold it steady.
• Prints upright with no supports: the dish flares at 45 degrees and the cone narrows as it rises. Bambu Studio: 1 h 49, 47 g, no warnings.
• Use a food-safe filament such as PETG, and wash it straight after use (printed layers can trap food).
CUSTOMIZE (OpenSCAD)
Reamer diameter.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.