S.H. Monsterarts (SHMA) 2014 MGP Right Shoulder Arm Barbell Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fix for the MGP 2014 Godzilla right shoulder to remove the gap. Includes a variant friendly for FDM printers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
When the Movie Graphics Plus 2014 Godzilla was released my friends an I noticed that it had a pretty large gap in the right shoulder. Upon investigating it turns out the Vietnam factory that SHMA uses used the 2021 Godzilla arm mold instead of the 2014 one. There's roughly a 1mm difference between them that leaves a gap.
So with the help of The Articulation Series, I created a replacement designed to remove the gap so that you get a nicer looking figure. It's designed to be a simple swap of the joint.
There's two versions. First one is a single solid part good for printing in resin. The second version is good for FDM printers where I've taken the liberty to cut the model in half to be printed flat on the plate. That way you don't need to worry about overhangs or supports. Print each half at the highest detail possible at max density, and then glue each half with super glue.
When installing pay close attention that the ball with the teeth goes into the body and not the right arm. The arm side is smooth and round. Also the tolerances of the barbell can be adjusted by increasing the model by 1%-2% depending on your machine and material. You can also use something like Kiki Fix to tighten things if it's too loose.
Credit for the pics goes to The Articulation Series. Thank you for helping me troubleshoot and investigating the problem.
Also if you need a ball joint separator I've got one modified from another person's model I plan on loading to my account. It makes quick work of popping the old joint out with a bit of muscle. You can find that model below.