1 / 7
Ineos Grenadier Phone Mount for Chargers that accept 16mm or 17mm ball — zdjęcie 1
1 / 7

Ineos Grenadier Phone Mount for Chargers that accept 16mm or 17mm ball

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ineos Grenadier mount for magsafe phone or device that accepts a 16mm or 17mm ball.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Simple but effective way of mounting a 16mm or 17mm ball on dash of Ineos. Replaces any of the Ineos cap screws on dash. I printed in Protopasta PETG CF with 50% infill, supports on build plate. The ball fits into hole that hold the cap screw and has slight clearance from dash front to avoid possibly marring the finish.

Very secure and solid mount that does no alter vehicle. Blocks air vent very slightly when mounted in the seat heater top outside hole. Can be moved to any other hole.

Requires   4m x 0.7 x 35 mm cap screw. Only needs to be snug.

Tagi