Borderlands Outrunner/Runner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Runner/Outrunner from Borderlands and Borderlands 2, modelled up in Fusion 360 using the games as a reference. The model is split into parts and optimised for 3D printing to help make things as simple as possible to print, whilst still maintaining a high level of detail.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.15
Filament:
Prusa PLA
N/A
Notes:
Splitting some of the parts in your slicer programme and then gluing them together after printing will make them easier to print with less supports and better quality.
The main chassis should be printed in two halves (split where the turret is).
Post-Printing
The model after priming
Post printing any parts that had been split for easier printing were glued together.
The parts were then sanded extensively to achieve a smooth finish before being sprayed with primer using an airbrush.
After this the parts were sprayed up in the two main colours (turquoise and silver), any remaining painting was then done by hand. When most of the painting was complete the model was assembled.
After assembly the fine details were painted and the model was weathered.
Category: Video Games