SILENCE! - Stealth Ultrasonic Anti-Bark Fence Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Discreetly silence yappers. This stealthy LED fence light enclosure secretly houses a solar ultrasonic anti-bark device.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got a neighbor with a dog that just won't quit yapping? Yeah, me too.
I needed a way to mount an ultrasonic anti-bark transmitter directly on the fence line without it looking like I was mounting some aggressive piece of hardware pointed at their yard. The solution? Hide it in plain sight.
Enter: SILENCE!
This parametrically designed enclosure completely camouflage a solar-powered ultrasonic transmitter by masking it as a sleek, modern, edge-lit LED fence light. The neighbor just sees a cool architectural light; you get your peace and quiet back.
🚀 Features
Total Concealment: The bottom section features precision 45-degree louvers. If mounted at standard fence height, the neighbor's line of sight goes straight into the solid plastic, completely hiding the TX speakers.
Acoustic & Weather Optimized: Those same 45-degree louvers act as a rain shield while allowing the high-frequency (20-25kHz) sound waves to exit the enclosure without bouncing back.
Edge-Lit Aesthetic: The inside back wall features a debossed NasonNation Robotics logo (I've included the STEP files so you can easily swap this out for your own logo or leave it blank!). The top LED shines straight down to create an edge-lit grazing effect.
Multiple Mounting Options: Bracket(s), inside screws, 3D print custom brackets
Two-for-One: Don't need the anti-bark feature? I've also included a split "LED-only" version of the enclosure so you can print a whole matching set just to light up your yard.
🔩 Hardware Required
Solar Fence Lights Outdoor (Top mount)
(4) M4 Heat-Set Inserts (5.86mm OD)
(4) M4 50mm Screws (for the lid)
Angle brackets and standard exterior wood/deck screws (for fence mounting)
🖨 The Secret Sauce: Print Settings
To survive the outdoors and look professional, you want to print this bad boy in PETG-CF. Standard PLA will melt in the sun.
Because of the extreme overhangs on the louvers and the embossed text, getting the supports to peel off cleanly can be tricky. I initially tried the dual-material PLA support interface trick, but it caused way too many extruder clogs. It's not worth the headache.
Instead, stick strictly to PETG-CF and dial in these exact slicer settings so your supports snap off perfectly:
Layer Height: 0.20mm Standard
Walls & Shells: 4 Wall Loops, 4 Top/Bottom Shell Layers (For sheer structural strength)
Infill: 20% Gyroid (Sparse) / Rectilinear (Internal Solid)
Supports: Tree (Auto) — Tree Slim style, On build plate only
Support Z-Distance:
0.2mm(This exact gap is crucial for letting the support peel away cleanly)Interface Pattern: Rectilinear
⚠ Slicer Tip: Go to your Others tab and UNCHECK "Flush into objects' infill" and "Flush into support". You want the structural walls of your housing to be pure, solid lines without the slicer trying to hide purge material inside them!
Happy printing, and enjoy the peace and quiet.