Keycap Puller - Flexible Two-Prong Tool for Mechanical Keyboards, 17 Minutes (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lift keycaps off a mechanical keyboard for cleaning or swapping without scratching them. Two sizes, 17 minutes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clean under the keys or swap to a new set: slide the two prongs down opposite sides of a keycap until the hooks catch under its edge, then pull straight up. Plastic prongs won't scratch the caps the way metal pullers can.
DETAILS
• Two pullers on the plate, for standard 1u keycaps (19 mm gap) and smaller low-profile caps (16 mm gap).
• Prints flat with no supports. Bambu Studio: 17 min, 5 g, no warnings.
• PETG flexes best; PLA works but is stiffer.
CUSTOMIZE (OpenSCAD)
Gap between the prongs and thickness.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.