1 / 2
Overhang and Bridge Test - 20 to 70 Degree Overhangs and 10 to 50 mm Bridges, Labelled (OpenSCAD) — zdjęcie 1
1 / 2

Overhang and Bridge Test - 20 to 70 Degree Overhangs and 10 to 50 mm Bridges, Labelled (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

See how far your printer can go before it needs supports: six labelled overhangs and five bridges. 56 minutes.

Ocena
0 / 5
Polubienia
3
Pobrania
31
Wydruki
0
Wyświetlenia
66
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Find out how steep an overhang and how long a bridge your printer can manage before you need supports, then use it to tune cooling, speed and fan settings. Six overhang walls leaning at 20, 30, 40, 50, 60 and 70 degrees from vertical and five bridges of 10, 20, 30, 40 and 50 mm, all labelled.

DETAILS

• 82 x 82 mm, 18 mm tall.

• Print it without supports on purpose: the steep overhangs and long bridges are meant to show where your printer starts to droop. Bambu Studio: 56 min, 24 g.

• Compare before and after a settings change by printing two.

CUSTOMIZE (OpenSCAD)

The list of angles and bridge lengths.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi