Overhang and Bridge Test - 20 to 70 Degree Overhangs and 10 to 50 mm Bridges, Labelled (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
See how far your printer can go before it needs supports: six labelled overhangs and five bridges. 56 minutes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Find out how steep an overhang and how long a bridge your printer can manage before you need supports, then use it to tune cooling, speed and fan settings. Six overhang walls leaning at 20, 30, 40, 50, 60 and 70 degrees from vertical and five bridges of 10, 20, 30, 40 and 50 mm, all labelled.
DETAILS
• 82 x 82 mm, 18 mm tall.
• Print it without supports on purpose: the steep overhangs and long bridges are meant to show where your printer starts to droop. Bambu Studio: 56 min, 24 g.
• Compare before and after a settings change by printing two.
CUSTOMIZE (OpenSCAD)
The list of angles and bridge lengths.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.