Hexagon mounting platter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hexagonal mounting plate for displaying decorations/moss matched to Nanoleaf dimensions
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 1
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nanoleaf Hexagon Decoration Mounting Plate
A hexagonal mounting plate designed for displaying lightweight decorations together with Nanoleaf Shapes Hexagons and Nanoleaf Elements wood-look panels.
The plate follows the hexagonal form of the Nanoleaf tiles, allowing a decoration to blend naturally into an existing wall arrangement rather than looking like a separate wall-mounted object. The recessed centre and raised perimeter give the plate a clean, framed appearance.
Features
Hexagonal shape designed to visually complement Nanoleaf panels
Suitable for Nanoleaf Elements wood-look installations
Recessed centre with a raised border
Integrated screw mounting point
Useful for lightweight seasonal decorations, signs, figures or small display pieces
Can be printed in a colour that matches the panels or in a contrasting accent colour
Dimensions
Top horizontal edge: approximately 114 mm
Internal border offset: approximately 10 mm
Designed around 120° hexagonal geometry
Mounting hole: approximately 5 mm
Please check the model dimensions before printing and scale only if required for your particular decoration.
Recommended print settings
Material: PLA or PETG
Layer height: 0.20 mm
Walls: 3
Top and bottom layers: 4
Infill: 15–20%
Supports: Not normally required
Orientation: Print flat with the rear face on the build plate
Brim: Optional, depending on bed adhesion
A wood-filled PLA can give the plate a particularly good appearance beside Nanoleaf Elements panels. Standard matte PLA is a good alternative.
Mounting and use
The plate is intended for lightweight decorative items. Attach the decoration using a method appropriate for its weight and material, such as:
Double-sided mounting tape
Removable adhesive strips
Small screws
Glue
Magnets added by the maker
Make sure that the wall attachment and printed part are suitable for the total weight. Do not use the plate for valuable, heavy or fragile objects without adding a secure mechanical mounting method.
Compatibility note
This is an independently designed accessory and is not an official Nanoleaf product. Check clearances against your own Nanoleaf installation before permanent mounting.
Tags
Nanoleaf, Nanoleaf Elements, Nanoleaf Shapes, hexagon, wall decoration, mounting plate, display mount, wall art, home décor, decoration holder, wood panel