Soldering iron stand collar for Proskit SS-203B / ZD-99
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement collar for the soldering iron stand of Proskit SS-203B / ZD-99. Holds the metal sleeve, no supports needed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Replacement collar for the soldering iron stand of the Proskit SS-203B / ZD-99 soldering station.
The original black plastic collar on my stand broke, so I measured it and modelled a replacement. It slides onto the slotted metal sleeve and gives the iron a funnel-shaped seat to rest in.
Key dimensions
Hole for the metal sleeve: 22.7 mm
Seat for the iron body: 31.2 mm
Wide opening: 36.2 mm
Wall: 2.7 mm, total height 25 mm
5 mm sloped funnels inside instead of sharp steps, so the iron slides in easily
The holes include about 0.2 mm of clearance for typical printer shrinkage.
Print settings
Orientation: wide ring down, as provided
Supports: none needed. The inner funnels are below 45°
Material: PLA works fine
0.28 mm layers, 2 perimeters , 15% infill
Other stands
The model is fully parametric. The Fusion file includes user parameters for all diameters, heights, wall thickness and funnel length (Modify → Change Parameters), so you can adapt it to a similar stand in a minute.