Soldering iron stand collar for Proskit SS-203B / ZD-99
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement collar for the soldering iron stand of Proskit SS-203B / ZD-99. Holds the metal sleeve, no supports needed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Replacement collar for the soldering iron stand of the Proskit SS-203B / ZD-99 soldering station.
The original black plastic collar on my stand broke, so I measured it and modelled a replacement. It slides onto the slotted metal sleeve and gives the iron a funnel-shaped seat to rest in.
Key dimensions
Hole for the metal sleeve: 22.7 mm
Seat for the iron body: 31.2 mm
Wide opening: 36.2 mm
Wall: 2.7 mm, total height 25 mm
5 mm sloped funnels inside instead of sharp steps, so the iron slides in easily
The holes include about 0.2 mm of clearance for typical printer shrinkage.
Print settings
Orientation: wide ring down, as provided
Supports: none needed. The inner funnels are below 45°
Material: PLA works fine
0.28 mm layers, 2 perimeters , 15% infill
Other stands
The model is fully parametric. The Fusion file includes user parameters for all diameters, heights, wall thickness and funnel length (Modify → Change Parameters), so you can adapt it to a similar stand in a minute.