1 / 1
Minifrisbee with minimal supports — zdjęcie 1

Minifrisbee with minimal supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minifrisbee with minimal supports

Ocena
5 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
23
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I prefer the normal size over the slim, and the frisbee that was rotated at 45° In my testing did have a slight error on the bottom where it printed just a slight mess-up in the layers. Everywhere else, including the top and around the frisbee, was fine.

You should also probably lower the print speed as it can mess up the first layers, causing it to collapse.

In the image the minifrisbee I printed at a 45° angle is on the opposite side of the chip, the chip is from me not the print.

Support is courtesy of PrintFins.com