1 / 1
Minifrisbee with minimal supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minifrisbee with minimal supports
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 23
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I prefer the normal size over the slim, and the frisbee that was rotated at 45° In my testing did have a slight error on the bottom where it printed just a slight mess-up in the layers. Everywhere else, including the top and around the frisbee, was fine.
You should also probably lower the print speed as it can mess up the first layers, causing it to collapse.
In the image the minifrisbee I printed at a 45° angle is on the opposite side of the chip, the chip is from me not the print.
Support is courtesy of PrintFins.com