Raspberry Pi Open Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple open wall mount designed for the Raspberry Pi 3B+, 4 or 5
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 223
- Wydruki
- 5
- Wyświetlenia
- 695
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple open wall mount designed for the Raspberry Pi 3B+, Pi 4 and Pi 5. All ports and pins are accessible.
No additional hardware needed; the Pi is held in place firmly by 3 clips. The Pi 5 version has one clip in a slightly different position, however should still be compatible with the previous models.
Important note: if using the cross shaped screw holes, check your screw head is not touching (and shorting) the back of the board. I have included an 7mm clearance version to accommodate larger screw heads.
Recommend printing everything above the 3mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.
No supports needed.
4mm clearance version pictured.