Raspberry Pi Open Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple open wall mount designed for the Raspberry Pi 3B+, 4 or 5
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 223
- Makes
- 5
- Views
- 695
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple open wall mount designed for the Raspberry Pi 3B+, Pi 4 and Pi 5. All ports and pins are accessible.
No additional hardware needed; the Pi is held in place firmly by 3 clips. The Pi 5 version has one clip in a slightly different position, however should still be compatible with the previous models.
Important note: if using the cross shaped screw holes, check your screw head is not touching (and shorting) the back of the board. I have included an 7mm clearance version to accommodate larger screw heads.
Recommend printing everything above the 3mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.
No supports needed.
4mm clearance version pictured.